Delock USB Type C converter voor 1 x M.2 NVMe SSD + SATA / HDD, Accessoires harde schijven

Description This converter by Delock enables the simultaneous operation of an M.2 NVMe SSD, in 2280, 2260, 2242 and 2230 format, and a 2.5″ or 3.5″ SATA HDD or SSD through the USB interface.Clone Function without PCThe built-in clone function allows to clone memory without using a PC. It is possible to clone from NVMe to SATA and SATA to NVMe. Specification • Connectors: 1 x USB 10 Gbps USB Type-C™ female 1 x M.2 key M slot 1 x SATA 6 Gb/s 22 pin receptacle 1 x DC jack• Chipset: JMicron JMS581D• Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key M or key B+M based on PCIe (NVMe)• Maximum height of the components on the module: 1.5 mm, application of double-sided assembled modules supported• For 2.5″ and 3.5″ SATA HDD / SSD• Supports NVM Express (NVMe)• Supports S.M.A.R.T.• Supports TRIM• Supports Native Command Queuing (NCQ)• Data transfer rate up to 10 Gbps• Supports UASP• 7 x LED indicator for power, access and copy status• Bootable• Function key: 1 x Clone button 1 x On / Off switch 1 x switch for clone mode• Dimensions (LxWxH): ca. 107 x 35 x 24 mm• Hot Plug, Plug & PlayPower supply specification• Wall power supply• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1.5 A• Output: 12 V / 3 A• Ground outside, plus inside• Dimensions: inside: ø ca. 2.5 mm outside: ø ca. 5.5 mm length: ca. 10 mm System requirements • Android 11.0 or above• Chrome OS• Linux Kernel 5.15 or above• Mac OS 12.4 or above• Windows 10/10-64/11• iPad Air (4th Generation) or above• iPad Pro (3rd Generation) or above• Surface Pro 7• PC or laptop with a free USB Type-A port or• Device with a free USB Type-C™ port or with a free Thunderbolt™ 3 or Thunderbolt™ 4 port Package content • USB Type-C™ converter• Cable USB-C™ male to USB-C™ male, length ca. 80 cm• Cable USB-C™ male to USB Type-A male, length ca. 80 cm• 3 x rubber nipple• External power supply 12.0 V / 3.0 A• User manual