Delock USB GaN Charger 1 x Type-C PD 3.1 with 140 W

Description This USB charger by Delock can be used to charge a USB devices. The port is equipped with a USB Type-C™ Power Delivery (PD 3.1), thereby supported devices can be charged with up to 140 watt. USB-PD Version 3.1 The USB PD 3.1 specification defines the voltage levels 28, 36 and 48 volts with support for Extended Power Range (EPR) with 5 amps each. Due to a calculated maximum power of 240 W (48 V / 5 A), other device classes can be supplied with power in addition to powerful laptops and desktop PCs. The Delock charger features an output power of 28 V and 5 A. The use of GaN (gallium nitride) transistors increases efficiency compared to conventional silicon technology. Even with very compact dimensions a high output power can be achieved. Note For the EPR mode (28, 36, 48 V / 5 A), a USB cable with a corresponding E-marker is mandatory. If this E-marker is not available, max. 3 A are transmitted. Corresponding cables by Delock are optionally available. Specification • Connectors: 1 x USB Type-C™ female 1 x plug CEE 7/16 • Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 2.0 A • Output: PD 3.1: 5.0 V / 9.0 V / 12.0 V / 15.0 V / 3.0 A, 20.0 V / 28.0 V / 5.0 A • Output power: max. 140.0 W total • Average active efficiency 89.75 % • Efficiency at low load (10 %) 87.28 % • No-load power consumption 0.182 W • USB Power Delivery (PD) 3.1 • Overload protection • Over current protection • Overheating protection • Short circuit protection • Colour: white • Dimensions without plug (LxWxH): ca. 113 x 75 x 35 mm Package content • USB charger • USB Type-C™ to USB Type-C™ cable, length ca. 1 m • User manual

Deze USB-oplader van Delock kan worden gebruikt om een USB-apparaat van stroom te voorzien. De poort is uitgerust met USB type-C™ Power Delivery (PD 3.1), waardoor ondersteunde apparaten tot 140 watt kunnen laden. In de specificatie USB PD 3.1 worden de spanningsniveaus 28, 36 en 48 volt bij...