Delock 90048 PCIe serieel, Controlekaart

Description The PCI Express card by Delock expands a PC by two external serial RS-422/485 ports. Devices such as scanners, protocol converters, POS systems, infrared -, IoT - devices etc. and different modes can be used. The PCIe card supports 2- and 4-wire operation at both connections for RS-422 and RS-485 devices. In addition, the integrated terminating resistors can optionally be activated, thus avoiding unwanted signal interference. RS-422 or RS-485 settings The settings can be set with jumpers on the PCIe card and provide the modes Auto Detect, RS-422 and RS-485 4-wire full duplex and RS-485 2-wire half duplex operation. Low Profile Form Factor By using the included low profile bracket, the PCI Express card can be also installed into a Mini-PC. Specification • Connectors: external: 1 x DB44 female connecting cable: DB44 male > 2 x serial RS-422/485 DB9 male internal: 1 x PCI Express x1, V2.0 • Chipset: MaxLinear XR17V352, SP3078E • Data transfer rate up to 1 Mbps • FIFO: 256 byte • Compatible with 16C550 UART • Data bit: 5, 6, 7, 8 • Stop bit: 1, 1.5, 2 • Parity: even, odd, none, mark, space • Flow control: XON / XOFF, RTS / DTR, CTS / DSR • RS-485 automatic half duplex data flow control • Protection for open, short-circuited or terminated input lines • Status LEDs: TX, RX • ±15 kV ESD protection on all signal pins (HBM) • ±15 kV IEC 61000-4-2 Air Gap Discharge • ±8 kV IEC 61000-4-2 Contact Discharge • I/O address and IRQ assigned by BIOS • Optional termination resistor 120 ohms System requirements • Linux Kernel 2.6 or above • Windows 8.1/8.1-64/10/10-64/11 • PC with one free PCI Express slot Package content • PCI Express card • 1 serial connecting cable • Low profile bracket • 4 x jumper • Driver CD • User manual

Delock PCI Express-kaart naar 2x RS-422/485 serie met 15 kV ESD-bescherming